Choose the right antenna for you by checking the characteristics in the tables below. Click on the model number to open the datasheet for more information.

• Cellular antennas
• Wi-Fi antennas

For information about extension cables, see Antenna extension cables.

Cellular antennas

Cellular antennas are compatible with edge gateways that support cellular (4G/LTE). For an overview, see Hardware catalog & documents.

Model number	IX2201	IX2202	IX2203	IX2205	IX2206
Mount: directly on IXrouter	✓
Mount: magnetic (with extension cable)		✓ (2m)			✓ (3m)
Mount: screw (with extension cable)			✓ (3m)	✓ (3m)
Use: indoor & outdoor (IP67)			✓	✓
Use: indoor only	✓	✓			✓
Picture

Some edge gateway models have 2 SMA connectors for cellular antennas. Always connect an antenna to the MAIN. Connecting an antenna to the DIV is optional and will improve the signal quality in most situations. It is recommended to place the antennas at least 25 centimeters apart.

Some older IXrouter3 models may not have this printed on the housing: The one closest to the power connector is the MAIN and the other connector is the DIV.

Wi-Fi antennas

Wi-Fi antennas are compatible with edge gateways that support Wi-Fi. For an overview, see Hardware catalog & documents.

Model number	IX2210	IX2211	IX2212**
Mount: directly on IXrouter	✓		✓
Mount: screw (with extension cable)		✓ (3m)
Use: indoor & outdoor (IP67)		✓
Use: indoor only	✓		✓
Frequency: 2.4 GHz	✓	✓	✓
Frequency: 5 GHz	~ *		✓
Picture

* Works with 5 GHz (reduced efficiency).
** Recommended for SecureEdge and SecureEdge Pro Wi-Fi models for optimal 5 GHz Wi-Fi performance.

Some edge gateway models have 2 SMA connectors for Wi-Fi antennas. Always connect at least one antenna. You can use either Wi-Fi connector, because both function the same way. Connecting a 2nd antenna to the other Wi-Fi connector can improve the bandwidth, if both antennas are not pointed in the same direction. Note that the IX2210 cannot be tilted.