The IXrouter can have up to 3 active connections that it uses to offer you its range of functionalities. This article clarifies the purpose of these connections.

The IXrouter is online when at least 1 of these connections is active.

VPN connection

The IXrouter's VPN connection enables you to remotely and safely access your machines as if you are on-site. Additionally, it's required for HTTP/VNC EasyControl to work. The VPN connection can be turned off.

The IXrouter connects to the closest IXON VPN server, based on its location. The location is determined based on its IP address, this is called GeoIP. You can overrule this by manually entering a location and then switching its VPN connection off and back on. For a list of all our VPN server locations, look here.

Configuration connection

The IXrouter also has a configuration connection. This is a lightweight connection that's used for pushing a new configuration to the IXrouter, deploying or removing Edge Apps, upgrading its firmware, or remotely switching the IXrouter's VPN connection off or on. This connection is always active.

Data logging connection

If you're using Live data, Historical data, or Alarms & Notifications the IXrouter also has a data logging connection. It's used for sending data from the IXrouter to the IXON Cloud. This connection is only active when you've configured Live data, Historical data, or Alarms & Notifications.