Using serial converters with IXON

30 Jan 2025
Knowledge

Description

Machines that do not have a built-in Ethernet port require additional hardware to connect them to an IXrouter. Some manufacturers provide an expansion module to add an Ethernet port to your machine while other machines require a serial converter.

This article lists several manufacturers for you to look into and also addresses the compatibility requirements for serial converters.

Serial converters

A serial converter converts a serial connection (e.g. RS-232 or RS-485) to an Ethernet connection (RJ45). Some converters are designed for a specific protocol, converting Modbus RTU to Modbus TCP for example, while other converters support multiple conversions and can be configured for your specific use case.

While we cannot recommend a specific manufacturer, other IXON users use serial converters from the following manufacturers: Beijer Electronics, Hilscher, Moxa, ADFweb, Lantronix, IBHsoftec, WaveShare, and Helmholz.

Software requirements

The software you use to program or connect to the machine needs to meet the following requirements:

Requirement	Description
Option to enter an IP address	The software you use to program or connect to the machine needs to provide the option to enter an IP address to connect to. If this is not the case, the software is unable to communicate over TCP/IP and is thus unable to communicate to the serial converter. If you are unsure, contact the developer of the software.
Option to configure a timeout	The software you use to program or connect to the machine needs to either provide the option to configure a timeout or have a high timeout set already. If this is not the case, the software is unable to communicate over the internet, because communication over the internet will always have a much slower response time compared to a local (serial) connection. If you are unsure, contact the developer of the software.

Requirement

Description

Option to enter an IP address

The software you use to program or connect to the machine needs to provide the option to enter an IP address to connect to. If this is not the case, the software is unable to communicate over TCP/IP and is thus unable to communicate to the serial converter. If you are unsure, contact the developer of the software.

Option to configure a timeout

The software you use to program or connect to the machine needs to either provide the option to configure a timeout or have a high timeout set already. If this is not the case, the software is unable to communicate over the internet, because communication over the internet will always have a much slower response time compared to a local (serial) connection. If you are unsure, contact the developer of the software.

Title

Using serial converters with IXON

URL Name

Using-serial-converters-with-IXON

Using serial converters with IXON

Serial converters

Software requirements

Introduction

Remote Access

Fleet Management

User Management

Customer Portal

Machine Data

Notifications

Hardware

Open Innovation

Security and Availablility

Release Notes

Knowledge

Using serial converters with IXON

Article Details

Serial converters

Software requirements

Properties

Introduction

Getting Started

Remote Access

VPN connection

VPN Client

Web Access

Connect to your machine

Connection details

M2M Cloud Cluster

Fleet Management

Edge gateway registration

IXagent registration

WAN Settings

LAN Settings

Edge gateway firewall

General device settings

User Management

Setup

Invite and manage users

My account

External Identity And Access Management

Customer Portal

Custom login page and homepages

White labeling

Machine Data

Live Data

Historical Data

Data Source protocols

Pages, cards, and reports

Components

AI assistant

Notifications

Alarms & Notifications

Hardware

Edge gateways and accessories

Open Innovation

Custom development

Marketplace

Security and Availablility

Security

Availability

Release Notes

IXON Cloud

Knowledge

Highlighted Articles

Tips

Related Articles