The display can be used to view and change certain settings. You can configure a lock code to prevent unauthorized changes.

Configure a lock code via the IXON Cloud

1. Go to Fleet Manager > Devices and click on your device name.
2. On the Info page, under Display, enter a lock code and Confirm changes.
   • The lock code needs to be exactly 4 digits.

You have now made the changes in the IXON Cloud, but these are not yet active in your device. You will need to push your changes to your device for them to take effect.

3. Click on Push config to device.
   • The device may temporarily disconnect and LAN communication may be temporarily interrupted while it's applying the new settings. This only takes a moment.

Configure a lock code via the display

1. Tap the screen of the deviceand swipe left to open the device info and settings.
2. Swipe up and tap Lock.
3. Enable the lock.
4. Enter a lock code and Confirm.
   • The lock code needs to be exactly 4 digits.

You have now made the changes in the device, but these are not yet up-to-date in the IXON Cloud. You will need to import your changes to the IXON Cloud to prevent it from being easily overwritten in the future.

5. Go to Fleet Manager > Devices and click on your device name.
6. In the top right corner, open the additional optionsand select Import config from device.